Kelowna service area

Energy Advisor For Kelowna Builders

Kelowna energy advisor for Part 9 builders: HOT2000 modelling, Step Code reports, F280 calculations, blower-door testing, and as-built documentation.

Direct contact
Jesse Cummings Registered Energy Advisor (NRCan) 250-858-4808

Kelowna requires the pre-construction compliance report before the building permit is issued and the as-built report before the occupancy permit is issued. The City also directs energy advisors to use 3,715 heating degree days in the compliance calculator for new submissions. Send the drawings and current City checklist so I can prepare the permit package from the same design the building department will review.

My Kelowna work follows three stages: Pre-Construction Energy Modelling and Reporting, Mid Construction Blower Door Testing, and Final As-Built Blower Door Testing and Reporting. A CSA F280 block-load heat-loss and heat-gain calculation is included at no additional charge with every pre-construction compliance package. As of August 2026, Kelowna does not require the mid-construction test, and the City lists a $325 building permit rebate, up to three per builder, for completing one.

For a quote, send the drawing set or share link, Kelowna address, current stage, target date, and City documents already received. Check the Kelowna requirement record and confirm the active permit path with the City.

Recorded requirement

Kelowna's current Step Code level for Part 9 homes.

Recorded requirement

Energy Step Code

Part 9 - Residential
Step 3Effective June 1, 2021
Recorded requirement

Zero Carbon Step Code

Part 9 - Residential
EL-1Effective March 10, 2025
Municipal sourceView Kelowna building requirements
Before relying on thisConfirm for the permit date

Record updated July 12, 2026 · Source accessed July 12, 2026

See Part 3 levels and full record for Kelowna

Local requirements

Kelowna requirements and checklists can change. Confirm the active path with the City building department before permit submission.

Building permit

Send the City instructions with the drawings.

  • Include the current City checklist and plan-review comments
  • Provide window, assembly, and mechanical information available at this stage
  • Confirm the target permit date and any known Step Code or Zero Carbon Step Code level
  • Confirm the current equipment and envelope information used for the permit package
Site work

Book testing when the result can still help.

  • Schedule a mid-construction blower door test (pre-drywall test) while the air barrier is visible if the project will use one
  • Have a site lead available when repairs can be made during the visit
  • Book the final test when openings and envelope penetrations are complete
  • Book the final test before the occupancy package is due
Builder questions

Questions builders ask about this region.

What should I send for the Kelowna building-permit package?

Send the drawings, site address, target permit date, window and assembly information, mechanical notes, and any City checklist or comments already received.

How are local requirements confirmed?

Use the current City checklist and permit comments. I align the Step Code file with those documents, but the City building department confirms the applicable requirement.

When should I book a blower-door test?

Book a mid-construction test while the air barrier is visible. Book the final test when exterior openings and envelope penetrations are complete.

Does Kelowna require a mid-construction blower-door test?

As of August 2026, no. The City lists a $325 building permit rebate, up to three per builder, for completing one. Confirm the active terms before the permit application depends on the rebate.

Request a quote

Send the address. Get a regional quote.

Send me the plans and whatever information you have. I'll take a look and get back to you with a quote.

jesse@apollobp.ca